Gps Connection Data - Trans-Cal SSD120 M Series Installation And Calibration Manual

GPS Connection Data

Given the speed with which new GPS units are entering the market, it is impossible to
provide data on every device. The following digitizer/GPS interconnections are provided
as a quick reference only, and though they are correct to the best of our knowledge,
always consult the latest installation, operation, and service bulletins from the GPS
manufacturer.
Apollo GX50, GX60, GX65
Signal
RxD2
Ground
Apollo GX50, GX60, GX65 Software Configuration
In test mode, rotate the Large knob to select serial port configuration RX. Press SEL,
rotate the large knob to select the RxD2 port, rotate the small knob to select AltEnc
input.
Apollo Model MX20 Multi Function Display
Apollo MX20
Signal
RxD2
Ground
Apollo MX20 Software Configuration Under External Data Source set altitude source
to Port 2 .
UPS Aviation Technologies (IIMorrow)
Apollo Model GX50, GX60, GX65
Apollo 37 Pin D-Sub
Connector
21
20
Apollo 37 Pin D-Sub
Connector
21
SSD120-(XX)M 26 Pin
Connector
Optional, configure the SSD120-
(XX)M for 10' resolution. See § 4.4.
SSD120-(XX)M 26 Pin
Connector
3
Optional, configure the SSD120-
(XX)M for 10' resolution. See § 4.4.
U or X
R or W
U or X
R or W
27