Ssd120-(Xx)M Serial Port Software Configuration - Trans-Cal SSD120 M Series Installation And Calibration Manual

4.4 SSD120-(XX)M Serial Port Software Configuration

This device incorporates two separate RS232E compatible outputs which may be
configured via software to transmit 2 different altitude data protocols
simultaneously.
1. Construct a wiring harness per the Wiring Harness Diagram 881668.
(This harness may be ordered directly from Trans-Cal Industries.
Please specify 9 pin or 25 pin connector.)
2. Connect the digitizer to an IBM compatible computer running
Hyperterminal as described in § 4.3 and as shown in the Calibration
Block Diagram 881669. Assign the serial port protocols as follows:
15