Chapter 5: User Interface; Lcd User Buttons - SolarEdge SE3500 Installation Manual

Chapter 5: User Interface

Chapter 5: User Interface
User buttons LCD
The four buttons are located inside the inverter above the LCD panel and are used to control the menus on the LCD
screen, as shown below:
•
Esc: Moves the cursor to the beginning of the currently displayed parameter; returns to the previous Esc: Moves the cursor to the beginning of the currently displayed parameter; returns to the previous
menu and cancel a modification value with an extended pressure (until broken appears). menu and cancel a modification value with an extended pressure (until broken appears). menu and cancel a modification value with an extended pressure (until broken appears).
•
High (1), Netherlands (2): Moves the cursor one menu item to another, moves between characters of a display High (1), Netherlands (2): Moves the cursor one menu item to another, moves between characters of a display High (1), Netherlands (2): Moves the cursor one menu item to another, moves between characters of a display
item, and alternates between the possible characters when setting a value.
•
Proceed to (3): Selects a menu option and accepts a modification value with an extended pressure (until Applied appears). Proceed to (3): Selects a menu option and accepts a modification value with an extended pressure (until Applied appears). Proceed to (3): Selects a menu option and accepts a modification value with an extended pressure (until Applied appears). Proceed to (3): Selects a menu option and accepts a modification value with an extended pressure (until Applied appears).
Use the three buttons to the right to enter 123 in the password entry. The LCD and the buttons can be
used for the following:
•
Setup Mode: after installing the inverter, the field technician will perform the basic configuration of the inverter, as Setup Mode: after installing the inverter, the field technician will perform the basic configuration of the inverter, as
described in UPS configuration using the user buttons page 30 described in UPS configuration using the user buttons page 30 described in UPS configuration using the user buttons page 30
•
Operating mode: LCD screen allows the user to verify that the UPS is working properly. Refer to Screens of the Operating mode: LCD screen allows the user to verify that the UPS is working properly. Refer to Screens of the Operating mode: LCD screen allows the user to verify that the UPS is working properly. Refer to Screens of the
UPS status on page 38 for a description of this option. Use the LCD light button to toggle through the informative UPS status on page 38 for a description of this option. Use the LCD light button to toggle through the informative
displays.
•
Error messages: In case of problems, an error message may appear on the LCD screen, refer to the Appendix Error messages: In case of problems, an error message may appear on the LCD screen, refer to the Appendix Error messages: In case of problems, an error message may appear on the LCD screen, refer to the Appendix
A: Errors and Troubleshooting on page 52 and UPS configuration using the user buttons on page 30 for more A: Errors and Troubleshooting on page 52 and UPS configuration using the user buttons on page 30 for more A: Errors and Troubleshooting on page 52 and UPS configuration using the user buttons on page 30 for more A: Errors and Troubleshooting on page 52 and UPS configuration using the user buttons on page 30 for more
information.
SolarEdge Installation Guide - MAN-01-00060-2.6
Figure 15: Internal User Buttons LCD
Esc
High (1)
Netherlands (2)
Validate (3)
29