System Tab - System Log - Algo 8186 User Manual

Restore All Settings and Files to Defaults
Resets the device settings (configuration) and all the files in File Manager: certificates,
licenses, and tones to factory default values.
Reboot the Device
Reboots the device.
Method
Specify whether the firmware files will be downloaded from the local computer or a remote
URL.
Firmware Image
Point to the firmware image provided by Algo.
MD5 Checksum
Point to the checksum file provided by Algo.
How To Upgrade 8186 SIP Horn Speaker Firmware
1. From the top menu, click on System, then Maintenance.
2. In the Upgrade section, click on Choose File and select the 8186 speaker firmware
file to upload. Note that both the FW firmware and MD5 checksum files must be
loaded.
3. Click Upgrade
4. After the upgrade is complete, confirm that the firmware version has changed (refer
to top right of the Control Panel).
System Tab – System Log
System log files are automatically created and assist with troubleshooting in the event the
8186 SIP Horn Speaker does not behave as expected.
Document 90-00079B
03/24/2020
Page 59
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker FW 1.7
(604) 454-3792
support@algosolutions.com