Features; Sip Paging: One 8186; Sip Ring Event; Multicast Overview - Algo 8186 User Manual

Sip horn speaker
Hide thumbs Also See for 8186:
Table of Contents

Advertisement

Features

SIP Paging: One 8186

The 8186 SIP speaker can be registered as a third-party SIP extension with a hosted or
enterprise Communications Server supporting 3
To register the speaker with the SIP server, use the Basic Settings > SIP tab in the web
interface to enter the Communication Server IP address, extension, username, and
password. This information will be available from the IT Administrator.
If VLAN is used, navigate to the Advanced Settings > Network tab to set VLAN options.
Important: once the speaker is using VLAN you will need to be on the same VLAN to
access the web interface.
The speaker may now be accessed by dialing its assigned extension from a telephone,
device, or client. The speaker will auto-answer, play the default WAV pre-announce tone,
and allow voice paging until disconnected.
There are a number of configurable speaker options:
Increase or Decrease Speaker Volume
Enable AGC (automatic gain control)
Enable Ambient Noise Monitoring (speaker volume adapts to background noise)
Enable Talkback
Customize pre-announce tone WAV file
The best voice paging quality and intelligibility will be obtained using the G.722 wide-band
audio codec. Most current IP telephones support G.722 which is sometimes referred to as
"HD" voice or audio.

SIP Ring Event

Set Monitoring Mode to 'Monitor Ring' and enter credentials. When a call is made to the
SIP extension the 8186 will play the selected WAV file from memory. Often, the 8186 will
be part of a hunt group or ring group to ring in conjunction with a telephone.

Multicast Overview

In addition to the ring and page features, the 8186 is able to send and receive IP audio
multicast messages over the network to support larger deployment for both paging and
ring/notification. This provides a scalable and efficient method of building large scale
notification solutions.
An Algo 8186 can be configured as a Master endpoint. When called from a phone, the SIP
registered 8186 auto-answers and plays the page audio over its speaker. Simultaneously,
the registered 8186 endpoint broadcasts the audio over the network using RTP multicast
Document 90-00079B
03/24/2020
Page 14
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker FW 1.7
rd
party SIP endpoints.
(604) 454-3792
support@algosolutions.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents