Wired Remote Controller Installation
Controlling 2-Remote controller
2-Remote controller is controlling one indoor unit, ventilator(ERV) or one group of indoor units and ventilator(ERV) with two remote
controllers.
When Connected to an Indoor Unit Only
Outdoor Unit
COM1 (F1, F2)
COM2 (F3, F4)
When Connected to an ventilator(ERV) Only
Master ventilator
(ERV)
NOTE
• For the slave Wired Remote Controller settings, please refer to the sections about the additional functions of the Wired
Remote Controller. (Refer to page19) 0 : Master, 1 : Slave
12
12
English
Indoor Unit
Wired Remote
Controller (Master)
COM1 (F1, F2)
Ventilator
(ERV)
COM2 (F3, F4)
Wired Remote
Controller (Slave)
Wired Remote
Controller (Master)
Wired Remote
Controller (Slave)