4
PARAMETER
SETTINGS / USE
4.1 REMOTE CONTROLLER.
Key:
1 - Batteries cover
2 - Batteries compartment
3 - Batteries
4.2
INSERTING THE BATTERIES INTO
THE REMOTE CONTROL.
Insert two batteries AAA in the following way
(Fig. 4-1):
- remove the batteries cover by pressing and
pushing down.
- Insert the batteries into the remote control,
checking the correct position of the positive
and negative poles indicated inside the batteries
compartment.
- Close the batteries cover.
- Press the On / Off button to verify that the
batteries have been inserted correctly.
Note: if the remote control does not work pro-
perly, remove the batteries and replace them after
a few minutes.
Note: in case of prolonged inactivity, remove the
batteries from the remote control.
Warning: in case of replacement, deposit the
old batteries in the appropriate containers. Do
not throw in the garbage waste.
4-1
36