Getting Ready To Print; Quick Install For Usb - Ricoh Aficio G700 Setup Manual

4. Getting Ready to Print

Quick Install for USB

Follow the procedure below to install the printer driver and the User Guide.
To install under Windows 2000/XP or Windows Server 2003, you must log on as a user with
administrator rights.
The following explanation uses Windows 98 as an example. Procedures under other operating
systems may differ.
Screens vary according to the operating environment.
Windows 95 and Windows NT 4.0 do not support USB connection with your printer. Connect
your printer via a network in this case.
For details about driver installation under Windows 95 or Windows NT 4.0, see P.50 "Installing
the Printer Driver".
For details about using the printer as a shared network printer, see "Sharing the Printer", the
Guide
.
1 Check that the power of the printer is off.
Do not turn on the power at this point.
Check that the [Power] key is not lit or blinking.
While you install the printer driver into the computer, switch the printer's power on. If the
power is switched on in advance, installation will fail. If installation fails, see P.63 "Trouble-
shooting".
AFL012S
4
User
35