Table of Contents
Advertisement
9.
SPECIAL FUNCTIONS
By pressing the
that allows to customise functioning of the CRONO 7,
according to the specific necessities.
To scroll the list, press the + / - buttons and press the
button to select the desired function.
9.1
INFORMATION
Press the
button and scroll the options present until
"INFO" appears. By pressing the
that allows to verify the functioning state of the CRONO 7.
If a determined value is not present "--" will be displayed.
Press the +/- button repeatedly to scroll the list.
To go back to normal functioning mode, press the
button or wait 60 seconds.
The parameters that can be displayed are listed below:
- MANUTZ: Days remaining before periodic maintenance.
- FW VERS: The display shows the firmware version of the
CRONO 7
.
.
22
button, a list of options is accessed
button, access a menu
9.2
LANGUAGE (language selection).
It is possible to select the functioning language of the
CRONO 7. It is possible to select from Italian (ITA as per
standard) and English (ENG).
N.B.: The CRONO 7 is factory set in Italian, proceed as
follows to pass to English:
- Press the
button.
- Scroll the list of parameters, pressing the + / - buttons
until reaching"LINGUA".
- Press the
button to select the function.
- Select "ENG" by pressing the + / - buttons.
- Confirm the selection using the
9.3
CHILLER.
Allows to set the CRONO 7 for the management of a chiller
for cooling rooms:
- ON: cooling functioning;
- OFF: winter functioning.
9.4
REGOLAZ (Management of regulation parameter).
Allows to customise the functioning parameters of the
CRONO 7:
- DIMENS (dimension and building inertia), adjustable
from 1 to 20, as per standard set on 10. It establishes the
reaction speed of the system depending on the type of
system present. For example:
button.
Hide quick links:
Advertisement
Table of Contents
