Programming Functioning Time - Immergas CRONO 7 Instruction And Warning Book

7.2

Programming functioning time.

By pressing the
the time periods programming window for programming
the room temperatures (as well as setting the current time
and day).
By pressing the + / - buttons, the items that can be set in the
menu are displayed alternately.
There are, in fact, two types of program:
- PR RIS: room central heating program
- PR RAF: room cooling program
By following the points described below, it is possible to
create or modify the time program selected.
1) Press the
by pressing the + / - buttons, after which confirm by pressing
the button.
2) Select the day or group of days by pressing the + / - buttons
and confirm the selection by pressing the
- Monday, Tuesday, Wednesday... Sunday (individual
day)
- Mon - Fri (from Monday to Friday)
- Sat - Sun (from Saturday to Sunday)
- Mon - Sat (from Monday to Saturday)
- Mon - Sun (from Monday to Sunday)
20
button, it is possible to enter
button, select the program to modify
3) Set the functioning times with comfort and economy
temperature. Within the 24 hours it is possible to define
a maximum of 4 time periods with Comfort temperature,
each of which is characterised by a switch-on time and a
switch-off time.
The minimum variation of the switch-on and switch-off
time is 30 minutes.
4) Set the first functioning period with comfort temperature
(ON 1) indicated at the top and the switch-on time at the
bottom. Press the + / - buttons to modify the switch-on
time and press the
point, pass to the next functioning period with comfort
temperature (OFF) indicated at the top and the switch-off
time at the bottom. Press the + / - buttons to modify the
switch-off time and press the
When the first phase has been defined, pass automatically
to the next functioning phases at comfort and economy
button:
temperature in order to program. This means repeating the
points described previously up to phase 4.
The sequences of the On and Off states must always be
sequential. For example, it is not possible to set "OFF 2" at
13.30 and "ON 3" at 11.00.
Once the day or group of days have been programmed,
proceed in the same way for the remaining days and the
remaining programs.
button to memorise. At this
button to memorise.