Table of Contents
Advertisement
5.2
Automatic functioning.
The CRONO 7 allows automatic functioning, in which a
time program manages the room temperature during the
hours of the day.
The desired room temperature can be adjusted onto two
independent levels: comfort ( ) and economy ( ) via the
button, whose distribution throughout the day or the
week is managed by hourly programming.
Press the
button until the icon switches-on on
the
display.
The CRONO 7 is factory-set with a standard program stated
in the table that follows. If this should not satisfy require-
ments, it is possible to modify it as described in the chapter
relative to programming.
Days
Mon - Fri
(Day 1 - 5)
Sat - Sun
(Day 6 -7)
Note: the system is designed to function on comfort and
economy temperature levels depending on the hour pro-
gram set. Therefore also during functioning on economy
level, if the room temperature measured is below that set,
the boiler can ignite.
5.3
Forced automatic functioning.
If in automatic functioning mode ( ) the room temperature
is modified by pressing the + / - buttons, the forced automatic
functioning mode is activated (displayed by the switch-on of
the flashing symbol). In this mode, the room temperature
will be regulated to the value set until the next switch-on or
switch-off phase of the automatic program set. The forced
automatic function can be interrupted by simply pressing
the
Fig. 13
16°C
from 23 to 6
from
from 8 to 11
from
from 13 to 17
from
from 23 to 7
from
button.
20°C
6 to 8
11 to 13
17 to 23
7 to 23
Fig. 14
15
Hide quick links:
Advertisement
Table of Contents
