Start-Up; Programming Current Day And Time; Selection Of Functioning Mode - Immergas CRONO 7 Instruction And Warning Book

4.

START-UP

4.1

Programming current day and time.

Switch the chrono-thermostat on by turning the main
selector onto one of the functions available.
Press the
mode and press the
On entering the programming mode, the time starts to flash.
Modify the hour and minutes by pressing the + / - buttons
and the button to confirm. Select the day of the week
and confirm using the
Once regulation has been completed, press the
to escape the regulation mode.
12
button to enter time and current time
button to modify the settings.
button.
4.2

Selection of functioning mode

According to the functioning mode selected, the CRONO
7 performs the requests of the user, displaying the results
on the display.
By pressing the main selector button (ref. 6 fig. 6) the
following functions can be selected:
- Off;
- Anti-freeze;
- Winter / Chiller.
button
Note: the room anti-freeze function is active in the anti-
freeze and winter functioning modes.
• Off mode. The room anti-freeze function is not
guaranteed in this mode (the boiler anti-freeze function
remains active). The CRONO 7 is off but remains powered
and therefore the times and programs remain memorised.
Fig. 7