Software Replacement; Emm Transfer - BRP Evinrude E-TEC Series Service Manual

Software Replacement

Engine Management Software programs are
loaded into the EMM at the factory. Periodically, a
new program may be available to enhance the
operation of an outboard. Select Engine Software
Update from the Utilities menu and refer to the
instructions provided with the program.
ENGINE MANAGEMENT MODULE (EMM)
DIAGNOSTIC SOFTWARE FUNCTIONS
IMPORTANT:
Bootstrap Tool, P/N 586551.

EMM Transfer

EMM Transfer is used to save engine history data
when the EMM must be replaced. Select EMM
Data Transfer from the Utilities menu. Select the
Collect EMM data to FILE option and follow the
instructions provided with the program.
IMPORTANT:
EMM timing must be synchronized to crankshaft
008095
position. Refer to TIMING ADJUSTMENTS on
p. 106.
Software replacement requires a
Whenever the EMM is replaced,
002383
4
65