ROUTINE SERVICE
LUBRICATION
LUBRICATION
Steering System
WARNING
Failure to regrease as recommended
could result in steering system corrosion.
Corrosion can affect steering effort, mak-
ing operator control difficult.
Grease the stainless steel output end of the steer-
ing cable with Triple-Guard grease.
Use an appropriate cleaning solvent to remove
corrosion and dirt from output end of cable before
coating it with grease. Make sure wiper nut is
installed and not damaged.
2
1. Steering cable
2. Wiper nut
Tiller Handle
Lubricate the tiller handle grease fittings with Tri-
ple-Guard grease.
1
1. Tiller handle fittings
32
Swivel Bracket and Trailering
Bracket
Lubricate the swivel bracket with Triple-Guard
grease.
Apply grease until the grease begins to flow from
the upper or lower swivel bracket areas.
Coat the pivot points of the trailering bracket with
Triple-Guard grease.
1
1. Grease fitting
2. Tilt support
Tilt Tube
Lubricate the tilt tube grease fittings with Triple-
1
Guard grease.
1
DR29546
2
1. Tilt tube fittings
2. Swivel bracket fittings
1
007020A
2
007032
1
2
007033