Shifter, Gear And Propeller Shaft Removal - BRP Evinrude E-TEC Series Service Manual

Shifter, Gear and Propeller Shaft
Removal
Unscrew the lower shift rod from the shifter yoke
and remove the shift rod from the gearcase.
1. Lower shift rod
Use long-nose pliers to remove the shift yoke.
Remove the shifter lever pivot pin. Discard the
pivot pin O-ring.
1. Shift lever pivot pin
Remove the propeller shaft and reverse gear
components from the gearcase.
1
3
1
1. Propeller shaft
2. Reverse gear
3. Thrust washer
007672
IMPORTANT:
pop out of the clutch when the propeller shaft is
removed.
Use a magnet to locate and remove the two shifter
detent balls and one detent spring from the gear-
case.
1
007673
1. Spring and balls
1
007674
GEARCASE
GEARCASE DISASSEMBLY
Shifter detent balls and spring will
2
007675
007676
12
255