BRP Evinrude E-TEC Series Service Manual page 243

•
Lock the retainer by moving the angled section
behind the straight section.
Locked Retainer Clip
1. Angled section behind straight section
Pull firmly on shift cable casing to remove back-
lash.
With outboard and shift lever in NEUTRAL, place
shift cable on the trunnion bracket of intake mani-
fold as shown. Rotate the anchor to align.
2. Anchor
Install washer between anchor and trunnion
bracket. Install screw. Tighten screw to a torque of
84 to 106 in. lbs. (9.5 to 12 N·m).
3. Screw
Throttle Cable Adjustment
Install throttle cable connector with Ball Socket
Installer tool, P/N 342225.
1
1
007465
1. Installer tool, P/N 342225
Place throttle cable through upper trunnion
pocket.
Hold twist grip in IDLE position. Pull firmly on
1
cable to remove backlash.
007466
1
007467
MIDSECTION
TILLER HANDLE SERVICE
007468
007469
11
241