BRP Evinrude E-TEC Series Service Manual page 239

Route wiring under throttle cable as shown.
Install shift cable on shift link. Secure with a new
cotter pin.
1. Cotter pin
Apply Lubriplate to the shaft portion of shift lever.
Install shift lever into shift bracket. Install the
detent spring with two shift detent retaining
screws. Tighten screws securely.
2
1. Screws
2. Shift detent spring
Install shift lever assembly. Install four shift lever
bracket retaining screws. Tighten screws securely.
1
007562
1. Screws
2. Shift lever bracket
Install shift link and cable on shift lever. Apply
Ultra Lock to threads of screw and install washer
and screw. Tighten screw to a torque of 84 to 106
in. lbs. (9.5 to 12 N·m).
1
007536
1. Screw and washer
Install shift cable retainer with two screws. Tighten
screws securely.
1
007538
1. Shift cable retainer
MIDSECTION
TILLER HANDLE SERVICE
1
2
007537
1
007535
11
1
007534
237