BRP Evinrude E-TEC Series Service Manual page 233

Remove the throttle cable.
The twist grip and trim switch wiring can now be
removed from the inner handle.
Use an appropriate tool to carefully pry the trim
switch out of the twist grip.
Remove the throttle friction control.
1
1. Throttle friction control
Remove nut, washer and bushing from port side
of tiller handle.
007544
1. Nut
2. Washer
3. Bushing
Remove steering handle screw.
1
1. Steering handle screw
007545
Remove base from tiller handle. Remove two
bushings from base.
1. Bushing
007546
MIDSECTION
TILLER HANDLE SERVICE
3
2
1
007547
007548
11
1
007549
231