BRP Evinrude E-TEC Series Service Manual page 228

MIDSECTION
STERN BRACKET – MANUAL TILT MODELS
Align dowel pin and steering friction lever as
shown.
1
2
5. Dowel pin
6. Steering friction lever
Install locking nut. Temporarily tighten locking nut
three to four full turns. Final adjustment will be
performed later.
1. Steering friction nut
Lubricate the swivel bracket through the four lubri-
cation fittings with Triple-Guard grease.
226
Apply Triple-Guard grease to both sides of thrust
washer. Install thrust washer on steering arm.
Install lower mount bracket on steering arm.
007458
1. Thrust washer
Install lower mount retaining screws. Tighten
screws to a torque of 10 to 12 ft. lbs. (14.5 to 16.5
N·m).
1
007684
1. Retaining screws
Install exhaust housing. Refer to EXHAUST
HOUSING SERVICE on p. 203.
Install tiller handle. Refer to TILLER HANDLE
SERVICE on p. 227.
Adjust tiller steering friction. Refer to Steering
Friction Adjustment on p. 24.
1
007624
1
007582