BRP Evinrude E-TEC Series Service Manual page 225

Install reverse lock release rod on bellcrank. Con-
nect rod to pin as shown.
1
3
1. Reverse lock release rod
2. Bellcrank
3. Pin
Tighten the bellcrank setscrew to a torque of 35 to
61 in. lbs. (4 to 7 N·m).
1. Bellcrank setscrew
Connect the hook end of spring to the reverse lock
release rod.
1
1. Spring
2. Reverse lock release rod
STERN BRACKET – MANUAL TILT MODELS
Attach the two reverse lock springs to the reverse
lock lever.
4
Use an appropriate tool to connect the reverse
lock springs to the top of the swivel bracket.
2
1
2
007613
1
1. Springs
2. Reverse lock lever
1
1
1. Springs
007614
Install tilt tube, bushings, thrust washers, handle
and stern brackets.
1 3 2
2
1. Tilt tube
007615 2. Bushings
3. Thrust washers
MIDSECTION
007616
007594
2 3
11
007593
223