BRP Evinrude E-TEC Series Service Manual page 222

MIDSECTION
STERN BRACKET – MANUAL TILT MODELS
Remove retaining clips from both sides of the
swivel bracket.
1
1. Clip
Remove pins from shallow water drive link and
swivel bracket. Use care not to lose spring.
1
2
1. Pins
2. Shallow water drive link
3. Spring
220
Remove the shallow water drive link and reverse
lock assembly from the swivel bracket.
007599
Remove cotter pins and disassemble shallow
water drive and reverse lock assembly as needed.
If tilt lock assembly requires replacement, use an
appropriate tool to remove bushing from swivel
bracket.
1
2
3
007600
1. Tilt lock assembly
2. Bushing
007601
007602