BRP Evinrude E-TEC Series Service Manual page 221

Use an appropriate tool to unhook the two springs
from the top of the swivel bracket. Remove the
springs.
1
1. Springs
Unhook spring from reverse lock release rod.
2
1. Spring
2. Reverse lock release rod
Place the tilt/run lever in the RUN position.
Loosen the bellcrank setscrew.
1
1. Bellcrank setscrew
STERN BRACKET – MANUAL TILT MODELS
Push down on link. Unhook reverse lock release
rod from pin and remove rod from bellcrank.
3
1. Link
2. Pin
007494
3. Bellcrank
Remove the bellcrank, tilt lock lever, and port stop
link from the swivel bracket
1
3
007595
1. Bellcrank
2. Tilt lock lever
3. Stop link
007596
MIDSECTION
2
1
007597
1
2
007598
11
219