Stern Bracket - Power Tilt Models; Stern Bracket Disassembly (Power Tilt) - BRP Evinrude E-TEC Series Service Manual

MIDSECTION
STERN BRACKET – POWER TILT MODELS
STERN BRACKET –
Power Tilt Models
Stern Bracket Disassembly
(Power Tilt)
If outboard is equipped with a tiller arm, remove
the tiller arm. Refer to TILLER HANDLE SER-
VICE on p. 227.
Remove exhaust housing. Refer to EXHAUST
HOUSING SERVICE on p. 203.
Remove lower mount bracket retaining screws.
1. Screws
Use a soft mallet to remove lower mount bracket
and thrust washer.
1
3
1. Mallet
2. Lower mount bracket
3. Thrust washer
208
If equipped with a steering friction device, remove
the steering friction nut.
1. Steering friction nut
Slide the steering arm out of the swivel bracket
and remove the thrust washer .
1
007682
1. Upper thrust washer
Remove the steering friction lever, washers and
plate.
2
007683
1. Steering friction lever
2. Steering friction washers
3. Steering friction plate
1
007684
1
007685
3
2
1
007686