EXTENSION SERVICE –
25" Models
Removal
Remove gearcase. Refer to Gearcase Removal
on p. 248.
Remove extension.
1. Extension
Remove studs from exhaust housing only if studs
are loose.
EXTENSION SERVICE – 25" MODELS
Installation
If studs are removed, clean threads with cleaning
solvent.
Apply Ultra Lock to upper threads of studs. Install
studs and tighten to a torque of 10 to 12 ft. lbs.
(14.5 to 16.5 N·m).
Install extension.
Apply Triple-Guard grease to lower threads of
1
studs.
Install gearcase. Refer to Gearcase Installation
on p. 248.
008372
MIDSECTION
11
207