BRP Evinrude E-TEC Series Service Manual page 18

ROUTINE SERVICE
LIFTING THE OUTBOARD
Lower outboard onto the pad. Use hoist to care-
fully roll the outboard onto its port side.
CAUTION
To avoid damage to the outboard, DO NOT
allow the outboard to fall unrestrained.
Remove chain from lifting tool.
Remove lifting tool from outboard.
Attach chain to lift eye on back of engine block.
WARNING
If the chain snap hooks are too large, the
cast in lift eye could break causing the out-
board to drop suddenly causing personal
injury and damaging the outboard.
16
1
1. Lift eye
Carefully lift engine with hoist.
NOTICE
To avoid damage to the outboard,
lift the outboard in one smooth motion. DO
NOT allow the outboard to bounce.
007211
007212
007213