Removal and Installation
Battery Charge Coil
Refer to the ENGINE CONTROL section for these
procedures.
Rectifier and Regulator
Remove two (2) bolts and the rectifier and regula-
tor. Disconnect the lead wire connectors.
1. Rectifier and regulator
Fuse Case
Disconnect the fuse case lead wires from the
engine wiring harness and the starter motor relay
terminal, then remove the fuse case.
1
1. Starter motor relay terminal
2. Fuse case lead wires
ELECTRIC STARTER
SYSTEM
Schematics
Tiller Handle Models
6
5
1
4
1. Starter motor
2. Fuse (25V)
001694
3. Battery (12V)
4. Starter motor relay
5. Neutral switch
6. Starter switch
Remote Control Models
2
4
001695
See "MWS" Harness Wiring
1. Starter motor
2. Fuse (25V)
3. Battery (12V)
4. Starter motor relay
ELECTRICAL
ELECTRIC STARTER SYSTEM
1
2
5
3
001696
1
2
3
001697
87