IGNITION TIMING
Start the engine and allow the engine to warm up
to normal operating temperature.
Make sure that the idle speed is adjusted properly.
Refer to "IDLE SPEED" on page 64.
Attach a timing light cord to the No. 1 ignition coil
high tension cord.
Check the ignition timing while operating the
engine at 900 RPM. The timing should be approx-
imately BTDC 5°.
1
1. Timing light
OVERBOARD WATER
PRESSURE INDICATOR
Check the function of overboard water pressure
indicator. Clean or replace the hose or nozzle as
needed.
1. Overboard water pressure
001361
MAINTENANCE
IGNITION TIMING
1
DRC4952
65
3