MAINTENANCE
ENGINE SIDE COVERS
ENGINE SIDE COVERS
Remove four (4) screws and the port side cover.
1
1. Screws (4)
2. Port side cover
Remove two (2) screws and the starboard side
cover.
1
1. Screws (2)
2. Starboard side cover
54
ANTI-CORROSION
PROTECTION
Sacrificial Anodes
2
Galvanic corrosion occurs in fresh or salt water.
Salt, brackish, and polluted water can accelerate
corrosion. "Sacrificial" anodes are intended to pro-
tect the underwater metal components of the out-
1
board from galvanic corrosion.
Inspect anodes and metal components below the
water level. Erosion of anodes is normal and indi-
cates that the anodes are functioning properly.
001722
2
TYPICAL
1. Anode
Test Procedure – Continuity
Calibrate a multimeter on the "HIGH" ohm scale.
Connect the black (–) tester probe to engine
001723
ground and the red (+) tester probe to the anode
surface. The multimeter should indicate little or no
resistance.
1
000288R
270757