BRP Johnson J30TEL4SUA 2007 Service Manual page 55

Description
Electrical and ignition wires and connections, inspect
Carburetor synchronization and linkage, inspect and
(2)
lubricate
Idle speed, check
Valve clearance, check
Gearcase lubricant, replace
Engine oil, change
Engine oil filter, replace
Fuel filter, replace
Gearcase lubricant, inspect fill level and condition
Starter pinion shaft, inspect and lubricate
Operator's Guide, review
Propeller shaft splines, inspect and lubricate
(2)
Spark plugs, replace
Decarbonize
Ignition timing, check
Driveshaft splines, inspect and lubricate
Water pump and impeller, inspect/replace
(1) Also recommended at 10-Hour Inspection
(2) Emission-related component
(3) Do not use light duty penetrating lubricants.
A Evinrude/Johnson Anti-Corrosion Spray or Evinrude/Johnson "6 in 1" Multi-Purpose Lubricant
B HPF XR gearcase lubricant
C Power Trim/Tilt Fluid
D Triple-Guard grease
E Evinrude/Johnson Molylube P/N 175356
F
Starter Bendix Lube Only P/N 337016
G Evinrude/Johnson Engine Tuner
H Evinrude/Johnson Ultra 4-Stroke synthetic blend oil
INSPECTION AND MAINTENANCE SCHEDULE
Engine Maintenance and Inspection Schedule
(3)
Frequency
D
B
H
B
F
D
G
E
MAINTENANCE
3
53