Tachometer Pulse Setting; Water Pump Overboard Indicator; Operating Temperature - BRP Johnson J30TEL4SUA 2007 Service Manual

Tachometer Pulse Setting

Confirm accuracy of tachometer reading.
•
Adjust dial on back of tachometer to 6 pulse/12
pole setting.

Water Pump Overboard Indicator

A steady stream of water should flow from the
overboard indicator.
1. Water pump overboard indicator
INSTALLATION AND PREDELIVERY

Operating Temperature

An outboard running at idle speed should achieve
a temperature based on the engine's thermostatic
control. In general, the powerhead temperature
should reach at least 100°F (38°C) after five min-
utes of idling. Confirm that the powerhead
reaches idle temperature.
1
DRC4952
RUNNING CHECKS
47
2