OPERATION
The power trim and tilt (PTT) system is operated by a "rocker" type switch (protected by a rubber thumb
pad) on top of the remote control box handle.
When the switch is depressed, power is delivered to the electric motor via the relay. The relay with the
blue wire connected to the pump is for trim/tilt "up". The relay with the green wire is for trim/tilt "down".
7
8
9
10
11
12
13
14
1. Tilt rod
2. PTT cylinder
3. Upper cylinder chamber
4. Piston
5. Free piston
6. Lower cylinder chamber
7. Oil filler cap
8. Oil reservoir
9. PTT motor
18
17
16
15
10. Check valve "A"
11. DOWN relief valve
12. Spool valve
13. DOWN pressure main check valve
14. Manual release valve
15. UP relief valve
16. UP pressure main check valve
17. Gear pump
18. Check valve "B"
POWER TRIM AND TILT
OPERATION
001941
237
1
2
3
4
5
6
10