POWER TRIM AND TILT
(PTT) UNIT
Removal
Raise the engine to the full tilt position and lower
the manual tilt lock levers.
1. Manual tilt lock lever (2)
WARNING
During service, the outboard may drop
unexpectedly. To avoid personal injury,
always support the outboard's weight with
a suitable hoist.
POWER TRIM AND TILT (PTT) UNIT
When removing or installing any type of
retaining rings, wear eye protection to
avoid personal injury.
Remove the E-ring, then push out the tilt rod
upper shaft.
1
001749
1. Tilt rod upper shaft
Remove two (2) bushings from the end of the tilt
cylinder rod.
Lower the tilt cylinder rod to the full down position,
then disconnect the battery cable.
1. Tilt cylinder rod
001731
POWER TRIM AND TILT
WARNING
1
001750
1
10
001914
229