Propeller Shaft Bearing Housing Installation - BRP Johnson J30TEL4SUA 2007 Service Manual

Install the forward gear thrust washer, the reverse
gear thrust washer, the reverse gear, the shim,
and the propeller shaft bearing housing.
3
4
5
1. Propeller shaft bearing housing
2. Shim
3. Reverse gear
4. Reverse gear thrust washer
5. Forward gear thrust washer
Propeller Shaft Bearing
Housing Installation
IMPORTANT:
Before installing the propeller
shaft and bearing housing assembly, move the
shift cam to the forward position by moving the
shift rod up or down.
Apply Triple-Guard grease to the O-ring and the
push rod.
1
2
1. O-ring
2. Push rod
Install propeller shaft bearing housing.
1
1. Propeller shaft bearing housing
2
When the bearing housing is fully seated, install
001883
and tighten two (2) bolts to a torque of 71 in. lbs.
(8 N·m).
1. Bolts (2)
Check the driveshaft thrust play again. Refer to
"Checking the
page 222.
Check the propeller shaft thrust play. Refer to
"Checking the Propeller Shaft Thrust Play" on
page 223.
001884
GEARCASE
ASSEMBLY
Driveshaft Thrust Play"
1
001829
1
001886
9
on
219