Driveshaft Disassembly; Shift Rod Removal - BRP Johnson J30TEL4SUA 2007 Service Manual

Driveshaft Disassembly

IMPORTANT:
Clean and inspect all components
during disassembly. Replace all seals, O-rings,
gaskets, and damaged components.
WARNING
When removing or installing any type of
retaining rings, wear eye protection to
avoid personal injury.
Remove the retaining ring, the driveshaft, and the
preload spring collar from the bearing housing.
2
1
1. Retaining ring
2. Preload spring collar
Remove the washer, the preload spring, the other
washer, and the tab lock washer. Note the position
of the tab lock washer before removal.
5
3
1. Retaining ring
2. Preload spring collar
3. Washer
4. Tab lock washer
5. Preload spring
6. Driveshaft

Shift Rod Removal

Remove the screws that secure the shift rod guide
stop. Remove the shift rod from the gearcase.
2
001879
1
1. Screws (2)
2. Shift rod assembly
GEARCASE
DISASSEMBLY
3 4 2 1
6
001841
9
001838
209