GEARCASE
DISASSEMBLY
To remove the driveshaft bearing housing from the
gearcase, use two 6mm bolts as screw jacks.
Turn each bolt alternately and equally to keep the
housing level as it separates from the gearcase.
1. 6mm bolts (2)
Lift the driveshaft and bearing housing assembly
from the gearcase.
1
1. Driveshaft
2. Bearing housing assembly
208
Remove the pinion gear, thrust washer, forward
gear, shim, and bearing.
1
5
4
1. Pinion gear
2. Thrust washer
3. Forward gear
001835
4. Shim
5. Bearing
Remove pinion shim from the gearcase.
2
1. Pinion shim
001836
1
3
2
001837
1
001838