BRP Johnson J30TEL4SUA 2007 Service Manual page 192

MIDSECTION
STERN BRACKETS, STEERING ARM, AND SWIVEL BRACKET
Remove the retaining ring and push out the tilt cyl-
inder upper rod.
1. Tilt cylinder upper rod
Remove the tilt tube nut from the stern bracket.
1. Tilt tube nut
Remove the lower shaft bolts. Slide the stern
bracket off the shaft.
1. Lower shaft bolts (2)
2. Stern bracket
190
Remove the PTT unit (or tilt assist cylinder).
1
1. PTT unit (or tilt assist cylinder)
001798
Remove the bonding wire from the port side stern
bracket. Pull the stern bracket outward to remove
it and the tilt tube from the swivel bracket.
Remove the bushings from each side of the swivel
1
bracket.
1
2
001799
1. Bonding wire
2. Stern bracket (port side)
3. Tilt tube
4. Bushings (2)
5. Swivel bracket
2
1
001800
1
001801
5
4
3
001802