Installation - BRP Johnson J30TEL4SUA 2007 Service Manual

Install the lower mounts and the covers on the
exhaust housing. Make sure that the arrow on the
lower mount is pointing upward.
At this time, tighten the bolts only finger tight to
temporarily hold the covers in place.
1. Lower mount (2)

Installation

Install the exhaust housing and oil pan to the
steering bracket.
IMPORTANT:
When installing the exhaust hous-
ing / oil pan assembly, be sure lower mount hex
head bolt properly fits into the lower mount
bracket groove.
1
1. Hex head bolt in groove
EXHAUST HOUSING AND OIL PAN
Apply Nut Lock to the threads of the upper mount
nuts. Install and tighten the upper mount nuts to a
torque of 26 ft. lbs. (35 N·m).
1
1
1. Upper mount bolts (2)
Tighten the bolts for both lower mount covers
001791
securely.
1. Bolts (2)
Apply Nut Lock to the threads of the lower mount
front nuts. Install and tighten the lower mount front
nuts to a torque of 44 ft. lbs. (60 N·m).
001792
1. Lower mount nuts (2)
MIDSECTION
1
001765
1
8
001763
1
001764
187