BRP Johnson J30TEL4SUA 2007 Service Manual page 188

MIDSECTION
EXHAUST HOUSING AND OIL PAN
Install the engine holder to the oil pan.
3
1
1. Dowel pins (2)
2. Gasket
3. Engine holder
Install and tighten four (4) bolts to a torque of 17 ft.
lbs. (23 N·m).
1
1
1. Bolts (4)
Install both upper mount assemblies to the engine
holder. Make sure that the arrow on the upper
mount is pointing upward.
186
Apply Nut Lock to three (3) bolts. Install and
tighten the bolts to a torque of 88 in. lbs. (10 N·m).
1
2
2
001789
1. Bolts (3)
2. Upper mount assembly
If the lower mounts are disassembled, place the
washer, the damper, and the lower mount on the
bolt. Apply Nut Lock to the threads of the lower
mount rear nut. Install and tighten the nut to a
torque of 29 ft. lbs. (40 N·m).
4
1
001769
1. Washer
2. Damper
3. Lower mount
4. Lower mount bolt
1
001767
3
2
1
001790