BRP Johnson J30TEL4SUA 2007 Service Manual page 187

Install the oil pan to the exhaust housing. Install
and tighten six (6) bolts securely.
1
2
1. Dowel pins (2)
2. Exhaust housing
3. Oil pan
1. Bolts (6)
Install a new gasket and the oil relief valve to the
engine holder. Tighten the relief valve to a torque
of 20 ft. lbs. (27 N·m).
1. Oil relief valve
Apply engine oil to a new O-ring, then install the
O-ring on the oil strainer.
EXHAUST HOUSING AND OIL PAN
Install the oil strainer to the engine holder. Install
and tighten the bolts securely.
3 3
2
3
1
001787 1. O-ring
2. Oil strainer
3. Bolts (2)
Apply engine oil to a new seal, then install the
seal on the oil pump.
Install the oil pump to the engine holder. Install
and tighten the bolts securely.
1
2
1
001773
1. Seal
2. Oil pump
3. Bolts (3)
Install two (2) dowel pins and a new gasket on the
oil pan.
1
001772
MIDSECTION
1
001770
8
3
001788
185