Assembly - BRP Johnson J30TEL4SUA 2007 Service Manual

MIDSECTION
EXHAUST HOUSING AND OIL PAN

Assembly

Use an oil seal installer to install a new driveshaft
oil seal in the engine holder. Make sure that the lip
of the oil seal is facing downward.
After installation, apply Triple-Guard grease to the
oil seal lip.
1
1. Oil seal
Install the water tube in the exhaust housing.
1. Water tube
184
Install the water pressure valve and the valve
cover. Install and tighten the bolts securely.
3
1. Bolts (2)
2. Valve cover
3. Water pressure valve
Install a new gasket and the exhaust tube. Install
and tighten the bolts securely.
001780
1
2
1
1. Exhaust tube
2. Bolts (3)
Install two (2) dowel pins to the exhaust housing.
001785
Apply Gasket Sealing Compound to the mating
surfaces of the exhaust housing and the oil pan.
1
2
001775
001786