Steering Handle; Removal - BRP Johnson J30TEL4SUA 2007 Service Manual

STEERING HANDLE

Removal

Remove the starboard side lower cover. Refer to
the MAINTENANCE section.
Loosen the lock nut and remove the throttle
cables from the throttle drum.
Remove the bolt and the plate.
2
1
1. Locknut
2. Throttle drum
3. Blot
4. Plate
Remove two (2) bolts and the tiller handle cover.
Remove the tiller handle and the throttle cable
assembly.
2
1
1. Bolts (2)
2. Tiller handle cover
Disconnect the emergency stop switch lead wire
and the engine start button lead wire.
1
2
4
1. Engine start button lead wire
2. Emergency stop switch lead wire
3
Remove the cotter pin and the washer, then dis-
connect the shift lever link from the shift handle.
2
001725
1. Cotter pin and washer
2. Shift lever link
Remove two (2) bolts and the tiller handle bracket.
001726
1
1. Bolts (2)
2. Tiller handle bracket
MIDSECTION
STEERING HANDLE
001727
1
001728
2
001729
175
8