Connect the clutch rod to the shift rod. Tighten the
locknut and the turnbuckle.
1
1. Locknut
Install the oil level dipstick guide and the bolt.
Install the electric parts holder and two (2) bolts.
Install the power pack, then connect all engine
wiring harness connectors to the power pack.
3
1
1. Power pack
2. Bolts (2)
3. Electric parts holder
4. Oil level dipstick guide
Install the starter motor relay and bracket. Secure
the bracket with three (3) bolts.
REMOVAL AND INSTALLATION
For models with a power trim and tilt (PTT) unit,
install the PTT motor relay and bracket. Secure
the bracket with the bolts.
1
001412
1. Bolts (3)
Connect the water hose to the thermostat cover
and the engine holder.
2
4
1. Water hose
Install the rectifier and regulator and two (2) bolts.
001411
Install three (3) ignition coils. Connect the primary
lead wire.
1. Ignition coils (3)
2. Rectifier and regulator
POWERHEAD
001410
7
1
001409
1
2
001408
127