Remove three (3) ignition coils. Disconnect the
primary lead wire.
Remove two (2) bolts and the rectifier and regula-
tor.
1. Ignition coils (3)
2. Rectifier and regulator
Disconnect the water hose from the thermostat
cover and the engine holder.
1. Water hose
Remove three (3) bolts, then the starter motor
relay and bracket.
REMOVAL AND INSTALLATION
For models with a power trim and tilt (PTT) unit,
remove the bolts, then the PTT motor relay and
bracket.
1
1
2
1. Bolts (3)
001408
Disconnect all engine wiring harness connectors
from the power pack, then remove the power
pack.
Remove two (2) bolts and the electric parts holder.
Remove the bolt and the oil level dipstick guide.
3
1
1
001409
1. Power pack
2. Bolts (2)
3. Electric parts holder
4. Oil level dipstick guide
POWERHEAD
001410
7
2
4
001411
123