Fuel Pump; Removal; Disassembly - BRP Johnson J30TEL4SUA 2007 Service Manual

FUEL PUMP

IMPORTANT:
Before replacing a suspect fuel
pump, remove and clean the fuel filter and install a
new filter element. Also, remove the fuel hose
from the fuel tank and blow low-pressure com-
pressed air through all passages and hoses to be
sure they are open. This might be the cause of
inadequate fuel delivery.

Removal

Disconnect the inlet hose and the outlet hose from
the fuel pump.
Remove two (2) bolts.
2
1
1. Inlet hose
2. Outlet hose
3. Bolts (2)
Remove the fuel pump and the O-ring. Note the
position of the pump rod before removal.
1
1. Fuel pump
2. O-ring
3. Pump rod

Disassembly

IMPORTANT:
alignment mark across each part of fuel pump.
3
001635
Remove six (6) screws, the outer plate, the dia-
phragm, and the valve body.
FUEL SYSTEM
FUEL PUMP
For correct assembly, scribe an
2
3
001636
6
001638
111