FUEL SYSTEM
CARBURETORS
Remove the bolt, the fuel filter bracket, and the
fuel filter.
2
1. Throttle control rod
2. Fuel filter bracket bolt
Remove the fuel pump. Refer to "FUEL PUMP" on
page 111.
1. Fuel pump
Remove four (4) bolts and two (2) nuts that secure
the inlet case to the intake manifold.
1. Bolts (4)
2. Inlet case
102
Remove the carburetor/inlet case assembly, then
remove the fuel inlet hose from the bottom 3-way
joint.
Remove four (4) screws and the air silencer case.
1
1
001612
1. Carburetors (3)
2. Screws (4)
3. Air silencer case
Remove the choke rods and the throttle link rods
from each carburetor.
Remove the bolts and the choke solenoid (TEL
1
models only) or the carburetor protector (tiller han-
dle model only).
Loosen the carburetor flange nuts, then remove
the nuts.
001635
1
2
001613
2
3
001614