Cover Installation - BRP Evinrude E-TEC G2 150 HP Installation & Predelivery Manual

Predelivery

Cover Installation

Cover Installation
Install the front cover. Install the upper screws
first. Then tighten the four front cover screws.
1
1. Screws
Install the top cover.
Push down to secure the latch.
Top Cover (cut-away view shown)
1. Latch
94
Use a shop towel to liberally apply Silicone Spray,
P/N 775630 to port and starboard rubber seals.
1
1
010266
1. Rubber seal
Install the port and starboard covers. Tighten the
screws one-quarter turn.
010262
1
010261
1. Quarter-turn screws
74° V6 Models
1
66° V6 Models
1
010268
010264