Rigging Hose And Cover Installation - BRP Evinrude E-TEC G2 150 HP Installation & Predelivery Manual

ALL Models
Use Evinrude Diagnostics software to set the
water pressure transducer.
1
1. 50 psi Transducer
Rigging Hose and Cover
Installation
Install the rigging hose to the entry port of the
cable entryway. Install the cover into place below
the cable entryway.
1
1. Rigging hose installation
2. Cover
Buss Cable, Hoses, and Wire Routing and Connections
Turn the cable entryway end cap 90° to lock it into
place.
1. Rigging center end cap
009237
2
009094
Outboard Rigging
1
009391
75
4