BRP Evinrude E-TEC G2 150 HP Installation & Predelivery Manual page 75

Open the Evinrude Diagnostics software pro-
gram.
2. From the Device List select the EMM for the
first engine.
1. Device List
2. Select the Identification screen and record the
model number and serial number of the
engine.
Close the Identification screen.
1
Identification Screen
1. Model Number & Serial Number
Buss Cable, Hoses, and Wire Routing and Connections
2. Next select the Settings screen.
1
Settings Screen
1. Configure button
2. Under Engine Option Configuration, select the
009161
3. Then select the engine's transom position from
Engine Option Configuration
1. Total number of engines
009281
2. Engine Selection list
3. Close the Configuration screen.
Then select the Configure button.
total number of engines.
the available Engine Selection list.
2
Close the Settings screen.
Outboard Rigging
1
009243
1
009237
73
4