Table of Contents
Advertisement
Boat Rigging
Cable and Hose Installation
Larger size Oetiker clamps may come apart
during handling. To reassemble the clamp, con-
nect the end loop to the end hook. Make sure the
alignment tab is installed into the alignment slot.
4
3
1
2
1. End loop
2. End hook
3. Alignment tab
4. Alignment slot
5. Correctly assembled clamp
•
Close clamp ear fully with Oetiker pincers (pli-
ers).
2
1
1. Open clamp
2. Closed clamp
42
3
4
5
009095
000092
Clamp Removal
Method 1: Position Oetiker pincers across clamp
ear and cut clamp.
Method 2: Lift end of stepless clamp with screw-
driver.
Method 3: Use Oetiker pincers (pliers) to grip
clamp. Pull clamp off of connection and discard.
000108
000090
000091
Advertisement
Chapters
Table of Contents
