BRP Evinrude E-TEC G2 150 HP Installation & Predelivery Manual page 16

Introduction
Outboard Selection
Notes:
1. Per helm the manufacturers recommendation, Uflex
SVS-Series and SeaStar Pro-Series helms are
NOT recommended for use in multiple outboard
installations. See Pro Series Helms on p. 23.
2. Hydraulic Tie Bar System REQUIRES one DPS and
one Non-DPS outboard. Also REQUIRES 3000 psi
hoses between the outboards, refer to the Installa-
tion Instructions provided with Hydraulic Tie Bar
Kit.
3. AB model outboards with DPS are NOT compatible
with SeaStar Pro-Series, or Uflex SVS-Series
Helms.
4. A three outboard installation (non- i-Dock)
REQUIRES 2 DPS models, but NOT three. See
Multiple Outboard Transom Mounting Locations
on p. 56.
5. A four outboard installation (non- i-Dock)
REQUIRES 2 DPS models. DPS outboards must
NOT be next to each other on the transom (unless
they are in positions 2 & 3). See Multiple Outboard
Transom Mounting Locations on p. 56.
6. The Evinrude i-Dock steering system REQUIRES
IHS outboard models. Refer to the model tables in
Models Covered on p. 11, for available IHS mod-
els.
7. For three and four outboard installations, the follow-
ing counter-rotation models are available with DPS
if needed: A200XHC, A250XC, A250ZC, A300XC,
or A300ZC.
8. Do NOT combine the Evinrude i-Dock Joy Stick
Steering System with the hydraulic tie bar kit.
14